Nisaka Manufacturing Co., Ltd. launches new liquid flow dyeing machine
Nisaka Manufacturing Co., Ltd. launches new liquid flow dyeing machine
Japan’s Hisaka Works recently launched a new type of CUT-MF liquid flow dyeing machine. This new liquid flow dyeing machine has wide applicability and can process natural fibers, synthetic fibers and composite fibers, and dye fabrics from 30g/m2 to 600g/m2. Its characteristics are:
(1) The main body is made of stainless steel SUS316, with a maximum operating temperature of 140°C and a maximum pressure of 5kg/cm2 (0.49Mpa);
(2) A cloth transfer pipe is installed under the cylindrical cloth retention tank, which has a good relaxing effect;
(3) The liquid flow from the injection port circulates the cloth, but cloth circulation assistance and spreading are added, and the drive belt cloth wheel must also be equipped with a frequency converter;
(4) In order to make the cloth even, retain it uniformly and prevent tension, an inner cylinder is fully installed in the retention tank, which solves the problem of color lines caused by tension;
(5) The fully automatic control panel adopts a touch-type operating panel computer, which can memorize up to 200 programs and easily cope with the automation of the dyeing process;
(6) Use graphics to display operating procedures and processing status, making operation, confirmation and programming simple;
(7) The control temperature can be set, making it easy to handle centralized control or management;
(8) Comes with temperature recorder and cloth end detector. 6zJTnypZ4
Disclaimer:
Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.
AA
