Filter paper is a good filter medium and has been widely used in various fields. The production of filter paper is very simple to say. It is nothing more than soaking a variety of fibers in a water-based binder to disperse them all, and then forming a tightly connected connected paper roll on the silk screen. It is dried, impregnated, and then dried to achieve the desired results. Acceptable humidity levels. But in fact, manufacturing efficient filter paper and maintaining consistent performance from batch to batch, roll to roll, and even year to year requires a very narrow range of changes in its weight, porosity, air permeability, strength, etc.
Teflon H13 high-efficiency filter paper Compared with glass fiber and stationary In terms of polar body filter materials, they can achieve a good balance between wind resistance and interception rate. They have different grades such as ULPA, HEPA and sub-high efficiency filtration, which can meet the needs of different customers for filtration accuracy. The material is resistant to strong acids and alkalis, and the high-efficiency filter paper series produced have good chemical resistance. The performance of the product itself will not be reduced due to cleaning, it can be reused, and the utilization rate of resources is high. With H13-U16 level reliable filtration grade.
Teflon H13 high-efficiency filter paperIt has a three-layer structure, with a PTFE microporous film in the middle, and the upper and lower layers are covered with imported non-woven fabrics. Spinning cloth. It has low wind resistance and is easy to clean. Surface dust can be removed by backflushing and reused. And the wind resistance is low and the energy consumed is small. This Teflon H13 high-efficiency filter paper can be widely used in clean rooms, semiconductors, electronic precision devices, flat panel displays, photovoltaics and other industries. Interested parties are welcome to enter the store for consultation.