Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric News Customized production of Teflon electronic membrane

Customized production of Teflon electronic membrane



Customized production of Teflon electronic membrane Did you know that the biaxial stretching process of Teflon electronic film gives the film good void characteristics. Films in different directions are stretch…

Customized production of Teflon electronic membrane

Did you know that the biaxial stretching process of Teflon electronic film gives the film good void characteristics. Films in different directions are stretched After stretching, the structure of the film’s micropores and agglomerates has changed, and at the same time, the mechanical properties of the film have anisotropic characteristics. Let’s learn more about it in detail.

PTFE resin is one of the polymer materials with the lowest dielectric constant discovered so far. The integrity of the signal transmission in it is better than other materials. It has been used in 5G-related radio frequency antennas, high-frequency copper clad laminates, radar antennas, etc., and can also be widely used in various connectors in the 5G field.

Teflon electronic membraneThe pore size can be between 0.1-10um, the thickness can be between 2-100um, and the porosity can be up to 50 %–80%, as many as hundreds of millions of micropores per square centimeter. It can effectively isolate water points, and the waterproof grade can reach IPX7 or above. Protect electronic instruments from becoming unusable due to moisture or water. Compared with other breathable filter materials, it has excellent air permeability. It is difficult to form a thick dust layer on the surface of the film, and the dust can be naturally peeled off.

The Teflon electronic film produced by the manufacturer uses imported raw materials and has a full set of advanced production equipment. The advanced clean room and independent composite slitting workshop ensure the production quality of PTFE membrane; production and testing instruments imported from the United States are used to test the quality of PTFE membrane, and it has also passed international SGS testing and certification, and ISI testing and certification. Interested parties can enter the store and contact us.


Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights and interests, please contact us and we will change or delete it as soon as possible.

AA

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/60173

Author: clsrich

 
Back to top
Home
News
Product
Application
Search