Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric News ptfe dust removal membrane for air pollutant emission filtration

ptfe dust removal membrane for air pollutant emission filtration



ptfe dust removal membrane for air pollutant emission filtration With the country’s strict requirements on air pollutant emissions from power plants, existing desulfurization and dust removal facilities h…

ptfe dust removal membrane for air pollutant emission filtration

With the country’s strict requirements on air pollutant emissions from power plants, existing desulfurization and dust removal facilities have If you cannot meet the current standards, if you cannot achieve up-to-standard emissions, you will be in danger of being shut down, which will have an adverse impact on the company. Therefore, it is necessary to research and apply environmental protection equipment technology. Here, the editor recommends PTFE dust removal membrane to everyone.

Wet dust collectors bring gas and liquid (usually water) into close contact, and use the inertial collision of water droplets and particles and other effects to capture particles or increase the particle size. Device. This type of purification device can not only remove dust, but also purify gas; it is highly efficient and can handle high-temperature and high-humidity gases (cooling), minimizing the possibility of fire and explosion. However, there is sludge during the treatment process; antifreeze equipment is required in winter; it is not suitable for purifying hydrophobic and hydraulic dust;

PTFE dust removal membrane is mixed, extruded, extruded, calendered, and bidirectionally stretched Made with special techniques such as stretching. Due to the characteristics of ptfe fibrillation, when uniaxial stretching (i.e. longitudinal stretching) is performed, the ptfe polycrystalline aggregates begin to extend and form some fibrils. The fibrils are parallel to the stretching direction and the length of the fibrils increases. ptfe The cross-section of fibrils is wide and thin, with the maximum width being about 100nm, and the smallest fibril being 0. 5 ~ 1. 0nm.

Suzhou New Material Technology Co., Ltd. is a manufacturer of ptfe air filter membranes , a fluorine material film manufacturer integrating R&D, production and sales of ptfe dust removal membranes, polytetrafluoroethylene films, Teflon films and coated filter materials. The company has advanced PTFE membrane production lines, coating and composite production lines, which are at the domestic advanced level . Interested parties can enter the store to inquire and purchase!


Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.

AA

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/59721

Author: clsrich

 
Back to top
Home
News
Product
Application
Search