Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric News Production of microporous PTFE bubble point membrane

Production of microporous PTFE bubble point membrane



Production of microporous polytetrafluoroethylene bubble point membrane Water is the source of life and the foundation of development. Wastewater is a place where renewable resources are intensive. If used prop…

Production of microporous polytetrafluoroethylene bubble point membrane

Water is the source of life and the foundation of development. Wastewater is a place where renewable resources are intensive. If used properly, it will not only solve the problem of water shortage and water pollution, but also bring high value-added by-products to enterprises and realize recycling. Closed-loop economic development promotes enterprises to embark on the path of green and sustainable development. Here, PTFE bubble film demonstrates its value.

Aeration membrane-bioreactor was first reported by Cote.P et al. in 1988. It uses breathable dense membrane (such as silicone rubber membrane) or microporous membrane (such as hydrophobic membrane). Polymer membrane), with plate or hollow fiber components, can achieve bubble-free aeration to the bioreactor while maintaining the gas partial pressure below the bubble point.

Polytetrafluoroethylene bubble point membrane is a perfluorinated polymer obtained by polymerizing the monomer tetrafluoroethylene. The porosity of the membrane can reach more than 88%, or even higher High, and this membrane has 1.4 billion micropores per square centimeter, with a pore size range of 0.1um-0.5um, and can be used for a long time in the range of -200~250℃. It has a high degree of chemical stability. It will not age, split or discolor after long-term use. It is almost resistant to the intrusion of all acids, alkalis and other chemical substances.

It is a high-tech enterprise focusing on the R&D, production and sales of polytetrafluoroethylene bubble film. It has a factory area of ​​nearly 8,000 square meters and professional production equipment. With a strong scale, we are a partner of the top 500 companies in the United States; the products we produce are all produced from imported raw materials, with finer molecular weight, cleaner quality and better uniformity. Moreover, we have a full set of advanced production equipment and testing instruments, as well as a complete pre-sales, sales and after-sales service system. If you are interested, please enter the store for consultation.


Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.

AA

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/59516

Author: clsrich

 
Back to top
Home
News
Product
Application
Search