The decisive factor in the development of enterprises in the 21st century is the development trend of automation. With the development of modern automation, automated baler equipment will play a large role in the future development of enterprises. The fully automatic baler is one of the baler series. Compared with the semi-automatic baler, it realizes the fully automated operation of the baler. This type of machinery adopts a fully automated design based on the original baler. It is simpler to operate and more durable. It is an ideal baling equipment. Generally speaking, the more common faults of balers are as follows.
Stuck phenomenon
The main manifestation of the tape jamming phenomenon is that the tape is stuck in the middle of the roller and cannot run, or there is a foreign object that is blocked and cannot be removed, causing the tape to become stuck. At this time, technicians or operators are required to remove the hexagonal nut. Washers, loosen the two M5 countersunk head screws on the middle connecting shaft. Since these two screws are fixed in the notch of the connecting shaft, the screws must be turned upward; remove the connecting shaft and take the upper turbine Just start, remove the jammed object, and restore the machine to its original appearance. I believe you can do better with simple operations.
The strapping machine does not cut the tape after strapping
Packaging after strapping The phenomenon of the machine not cutting the belt is generally caused by the packing belt being too tight. The operator needs to adjust the tightness.
The baler does not come out with tape
The baler does not come out with tape. This type of failure is relatively common. The operator should check whether the “tape length adjustment” is at “0” and then see if the tape threading process is correct; if not, check whether there is any foreign matter stuck near the tape feed roller.
Warm reminder
In daily work, when a baler appears When a fault occurs, repairs should be carried out according to the relevant symptoms of the machine. Do not handle it without authorization. Otherwise, improper operation may cause certain damage to the machine, resulting in irreparable consequences. As a packaging equipment such as balers and carton sealers, we In order to better solve the problem for the benefit of customers and machines and equipment, the manufacturer is best to ask specialized personnel to handle it.
In addition, balers or other packaging machinery and equipment need to be used rationally. Items outside the load-bearing range of the baling machine cannot be packed. Operators should also pay more attention to the safety of the machine. Inspection and maintenance can also play a certain role in reducing failures and extending the service life of the baler. </p
