Although the entire Shaoxing printing and dyeing industry is currently enveloped in the “order cancellation” storm, every printing and dyeing factory is doing its best to increase the benefits of its insurance policies! However, as a basic route for industrial upgrading in Shaoxing, supporting the upgrading of the printing and dyeing industry is a major substantive measure for Shangyu District to promote the optimization of the ecological environment and promote high-quality economic development. Take a look at the report below
Increase the upgrading of printing and dyeing enterprises
Recently, we learned from the relevant departments of Shangyu District that this year Shangyu District will increase its support for the upgrading and upgrading of the printing and dyeing industry, and vigorously support the printing and dyeing industry through classified disposal, policy subsidies, etc. Industrial upgrading.
According to reports, the printing and dyeing industry, as an indispensable and important part of the light textile industry, has already formed a certain industrial scale in Shangyu District. Over the years, printing and dyeing enterprises have achieved sustained, stable and rapid development of the printing and dyeing industry by strengthening technological innovation and “three wastes” management. However, due to its characteristics of high pollution, high energy consumption, and low added value, the development of the printing and dyeing industry is subject to multiple constraints from environmental and resource factors.
To this end, Shangyu District has further formulated specific supplementary policies on the basis of the previous work plan for the upgrading and upgrading of the printing and dyeing industry, and decided to implement the economic and technological development of the original Hangzhou Bay Shangyu Printing and dyeing enterprises outside the development zone will be classified and disposed of in two ways: upgrading in place or shutting down and exiting, so as to speed up the upgrading of the printing and dyeing industry.
According to the latest regulations to support the upgrading and upgrading of the printing and dyeing industry, companies with printing and dyeing workshops, unshaped machines and no external printing and dyeing processing business have passed the upgrading and rectification acceptance Enterprises are allowed to upgrade in situ, but they must pass the acceptance of relevant upgrade standards before the end of this year.
Other printing and dyeing production and processing enterprises must implement shutdown before the end of December this year. Those that meet the conditions for postponement of shutdown can be postponed to the end of December next year.
▲The urban area with many high-rise buildings in Shangyu
For production equipment that has withdrawn from printing and dyeing enterprises, the accounts will be accounted for at a specific time The audited net value after equipment depreciation is multiplied by the corresponding percentage for subsidies, and an upper limit is set for the maximum subsidy amount for a single enterprise.
For companies that exit printing and dyeing and sign a shutdown agreement within the specified time limit, dismantle the original equipment, and dispose of their employees, corresponding rewards will be given per mu, and will be given once after the acceptance by the relevant departments. Sex cashes in.
In addition, Shangyu District encourages printing and dyeing enterprises outside the agglomeration area to move into the park on the basis of upgrading, upgrading, rectification and acceptance and meeting the access conditions of the agglomeration area, and will be given corresponding compensation according to the pollution emission indicators. Proportional land supply arrangement.
Relevant policy arrangement
Supplementary Opinions on Supporting the Upgrading and Upgrading of the Printing and Dyeing Industry
In order to accelerate the upgrading and upgrading of the printing and dyeing industry, promote the optimization of the ecological environment, and promote economic development Quality development, according to the fact that Shaoxing City no longer organizes the recognition of green demonstration benchmark enterprises in the printing and dyeing industry, in the “Notice of the Shaoxing Shangyu District People’s Government Office of the Shaoxing Shangyu District People’s Government Office on the Issuance of the “Shangyu District Printing and Dyeing Industry Upgrading and Upgrading Work Plan” (District Party Committee Office [2016] No. 93), “Policy Opinions of the Shaoxing City Shangyu District People’s Government Office on Supporting the Upgrading and Upgrading of the Printing and Dyeing Industry” (District Party Committee Office [2016] No. 94), This supplementary opinion is specially formulated.
1. Classified disposal
According to the original Hangzhou Bay Shangyu Economic and Technical The actual production and operation situation of printing and dyeing enterprises outside the development zone will be classified and dealt with in two ways: in-situ promotion and shutdown and withdrawal, and the upgrading of the printing and dyeing industry will be implemented.
(1) In-situ improvement
There is a printing and dyeing workshop (supporting printing and dyeing enterprises), which has no shaping machine and is not open to the public. For printing and dyeing processing businesses, enterprises that have passed the upgrading and remediation acceptance are allowed to upgrade in situ, but they must pass the “Upgrading Standards for Printing and Dyeing Enterprises (Workshops) Outside Hangzhou Bay Shangyu Economic and Technological Development Zone” before the end of 2020.
(2) Shutdown and Exit
Other printing and dyeing production and processing enterprises must implement shutdown before the end of December 2020, but in If the land for relocation has been obtained before the end of 2020 (inclusive) (through public delisting), the closure period will be extended to the end of December 2021.
II. Policy subsidies
(1) For printing and dyeing enterprises that have withdrawn Production equipment, based on the book equipment at the end of 2015, is depreciated to 50% of the audited net value at the end of the month when the closed enterprise exits. The maximum subsidy amount for a single enterprise shall not exceed 10 million yuan. All equipment must be consistent with the accounts, invoices, and actual conditions. .
(2) If a printing and dyeing enterprise signs a shutdown agreement within the prescribed time limit, dismantles the original equipment, and disposes of its employees, the enterprise’s land (including lease) rights certificate (including lease) shall be ) area, and will be rewarded at a standard of 150,000 yuan per mu. The reward funds will be provided by the enterprise.�The affiliated township (street) applies and verifies the area, and the district printing and dyeing chemical industry high-quality development office will cash it out once after acceptance.
3. Relocation land
(1) Encourage outside the agglomeration area Printing and dyeing enterprises entering the park must meet the admission conditions of the agglomeration area in addition to the daily pollution discharge requirements (for details, see the “Standards for Relocation of Printing and Dyeing Enterprises in Shangyu District”).
(2) The land for resettlement of printing and dyeing enterprises clustered in the park will be calculated in sections according to the approved emission indicators after integration and reorganization. For printing and dyeing enterprises that have passed the upgrading and remediation acceptance, those whose pollution emission indicators are above 2,000 tons/day (inclusive) and below 3,000 tons/day will be provided with no more than 30 acres of land; those whose pollution emission indicators are above 3,000 tons/day (inclusive) and below If the amount is less than 4,000 tons/day, the land supply shall not exceed 50 acres. Those with a sewage emission target of 4,000 tons/day will be provided with a standard land supply of no more than 60 acres, and those with a sewage discharge index of 4,000 tons/day will be provided with an additional 10 acres of land for every 1,000 tons/day. The land is publicly sold by listing, and the starting price is based on relevant documents from the district government.
IV. Others
(1) Matters not covered by this supplementary opinion will be studied by the district’s leading group for the high-quality development of the printing and dyeing chemical industry Decide.
(2) The incentive funds involved in this supplementary opinion will be guaranteed by the district finance, and the specific implementation details will be formulated separately.
(3) This supplementary opinion will be implemented on a trial basis from February 10, 2020, and the district government office will be responsible for the interpretation. The specific work will be carried out by the district government office in conjunction with the high-quality development of the district’s printing and dyeing chemical industry. The Leading Group Office (District Economic and Information Bureau), Ecological Environment Branch, and Finance Bureau are responsible.
Attachment sorting
Upgrading standards for printing and dyeing enterprises (workshops) outside the Hangzhou Bay Shangyu Economic and Technological Development Zone
In order to promote the printing and dyeing enterprises outside the Hangzhou Bay Shangyu Economic and Technological Development Zone Upgrade the files, promote the optimization of the ecological environment, and build an industrial system for high-end green printing and dyeing enterprises. In accordance with the goal of “green high-end, domestic leading” and the standards of green benchmark demonstration enterprises in Shaoxing’s printing and dyeing industry, combined with the current situation of printing and dyeing enterprises in our district, from enterprises (workshops) Equipment level, green development capabilities, and corporate management levels will improve the level of the enterprise.
1. Enterprise equipment level
The main production equipment complies with the “Shaoxing According to the requirements of the “Advanced Technology and Equipment Standards for the Municipal Printing and Dyeing Industry”, the company has introduced internationally leading bleaching, printing, dyeing and finishing equipment, intelligent and efficient short-process pre-treatment equipment, small liquor ratio environmentally friendly airflow dyeing machines, automatic metering and conveying systems for auxiliaries, and comprehensive Advanced equipment such as automatic pulp mixing system and high-speed digital printing machine (imitation digital printing machine) improve the digitalization, intelligence and automation of the production process; the liquor ratio of intermittent pre-treatment and dyeing equipment is not greater than 1:6.
2. Green development capabilities
Adopt efficient short processes and less Water and less alkali pre-treatment technology, less water and less salt dyeing technology, less water and less pulp printing technology, knitted fabric continuous dyeing and finishing technology, energy-saving and environmentally friendly finishing technology; use environmentally friendly dyes and auxiliaries. Adopt waste gas closed recovery treatment, promote biofilm treatment and other reclaimed water reuse technology, high-temperature wastewater thermal energy recovery and utilization technology, and alkali recovery process technology. The discharge of “three wastes” meets relevant national and local standards. Enterprises promote green production methods through cleaner production audit and acceptance and environmental management system certification.
3. Enterprise management level
Achieve lean manufacturing and management Standardization and operational informatization. Water, electricity, and steam are subject to three-level metering management; scientific management systems, standards, and methods are used to reasonably and effectively plan, organize, coordinate, and implement various production factors (people, machines, materials, methods, environment, information, etc.) Control and inspection, the site is clean and orderly; major equipment configuration online inspection and control system; computer-aided design, distributed control system, local production execution system, enterprise resource planning system, energy consumption and pollutant emission online monitoring and early warning and other automatic control systems, Information technology has been fully applied to achieve high-quality, efficient, low-consumption, balanced, safe and civilized production. </p