The rollers and top rollers on the combing machine rotate quickly and easily generate static electricity. Dust in the air, impurities in the drafting part and a small amount of fibers in the cotton web are easily adsorbed and entangled on the top rollers and rollers under the action of static electricity. , and the cleaning device (such as cleaning rubber sleeve) between the rubber roller and the roller will be easily deformed by heat if used for a long time, resulting in poor contact between the rubber sleeve and the rubber roller, and further entanglement will occur. If the entangled impurities cannot be removed in time, the stretched cotton web will be entangled on the rollers and top rollers, causing the equipment to stop running, greatly reducing work efficiency and increasing work intensity. In order to solve the problem of winding in the drafting part of the combing machine, the equipment can be appropriately improved. The specific methods are as follows:
1. Collect the waste rubber rings of the spinning machine and use fish bead glue Paste it on the steel cotton stripper to replace the original cleaning rubber sleeve, achieve surface contact between the apron and the rubber roller, and reduce the problem of rubber roller tangling.
2. Collect the cleaning rubber sleeve replaced in step 1 above, and put it on the first roller stripping swab binding part, so that the cleaning rubber sleeve on the stripping swab binding part is The surface contact between the insert and the roller is also changed, and the problem of roller entanglement can also be alleviated.
3. Improve the photoelectric switch to detect the winding and stopping device of cotton sliver to electromechanical integration. The grounding ring wire and the piston rod wire on the machine will detect when the roller and rubber roller are damaged. When winding, the piston rod contacts the grounding ring, the line is connected, and the equipment will send out a signal in time and shut down quickly. The equipment under this method has sensitive response and fast signal transmission, which can avoid the excessive thickness of the cotton mesh wrapped around the rubber rollers and rollers caused by delayed shutdown signals, effectively protect the rubber rollers and rollers from damage, and reduce waste of raw materials and The effect is obvious in shortening the cleaning time of operators.
</p
