The melt-blown alternative material ptfe mask film has very excellent tensile properties. It can still be formed and rolled up when stretched hundreds of times in the vertical and horizontal directions, and the minimum thickness of the material can be less than 1um, with very low resistance. Higher efficiency can be obtained at the same time.
N95 masks have become widely known recently, and “Does the HEPA high-efficiency filter used in the fresh air system to filter outdoor dirty air also have the filtration effect of N95?” is the most frequently asked question recently.
N95 (N stands for not resistant to oil, 95 means that when exposed to a specified number of special test particles, the particle concentration inside the mask is more than 95% lower than the particle concentration outside the mask).
To put it simply, the N95 mask filter material has a filtration efficiency of 95% for non-oily particles with a diameter of ≥0.3 μm (such as dust, acid mist, paint mist, microorganisms, etc.).
The melt-blown alternative material ptfe mask membrane can ensure the complete retention of bacteria and other impurities. It has the characteristics of high temperature resistance, strong acid and alkali resistance, and wide chemical applicability. When used for gas filtration, it can achieve 100% retention of various substances above 0.02um. Phages, bacteria and particles.
Realizing surface filtration enables the dust removal efficiency to reach 99.9%~99.999%, which can operate at a continuous operating temperature of 240°C and an instantaneous temperature of 260°C.
It is a manufacturer specializing in R&D, production and sales of melt-blown alternative material ptfe mask film.
Our company is different from other manufacturers.
Our company can customize according to user’s requirements.
The optimized combination of key technical parameters such as speed ratio, pressure ratio, operating temperature, etc. can realize online control of air permeability, thickness and void ratio according to the ratio and pore-forming medium to meet the different requirements you need. .
Interested parties can enter the store for consultation.
</p
