The principles and types of electronic edge twisters 1. The edge twisting principle of the electronic edge twister No matter how the electronic edge twister is divided, the edge twisting principle is the same, …

The function and structure of electronic edge twister The weaving process requires that the fabric must have corresponding edge-twisting devices during weaving. Generally, it is mechanical edge twisting. This a…

Maintenance of the tuck-in device 1. Lubrication: All fold-in edge devices need to be completely lubricated before use. Each device requires about 450g of oil, and add oil to the upper part of the oil mark. DMA…

Technical requirements for acrylic natural yarn Table 51 2-65 Technical requirements for polyacrylonitrile fiber natural yarn Line density (tex) Wait Single line breaking strength (cN/tex) Not less than Weight …

Installation and use of folded edges 1. Installation instructions for steel reed and auxiliary reed The installation instructions for steel reed and auxiliary reed are shown in Figure 3-3. On the left side of t…

GD type water jet loom The GD768 water-jet loom is a new generation of ultra-high-speed jet loom developed by Shenyang Hongda Fabric Machinery Co., Ltd. after introducing the Japanese Nissan water-jet loom desi…

Type structure and technical specifications of tuck-in device 1. Type (1) According to the type of loom equipped: rapier loom, projectile loom and air-jet loom, etc. (2) According to the purpose: used for weavi…

The function and conditions of the tuck-in device Shuttleless looms are limited by weft insertion, so most fabrics have raw edges, but they can also be equipped with a tuck-in device to make the fabrics have fi…

Maintenance and maintenance of electronic jacquard device The dirt and lint from the cooling fan filter on the top cover of the jacquard device and the power box of the jacquard device should be removed every w…