Stopping device 1. Electrical contact stop device (1) Type: Electrical contact type. (2) Warp stop piece: electrical contact type warp stop piece. (3) Number of stops: 2 to 8. (4) Rated working voltage: 12VDC o…

Winding guide and unwinding Spinning yarn must be wound onto the drum in a spiral shape. For this purpose, a winding leisure and a yarn guide leisure are required. There are two types of winding: dynamic drum w…

Model technical specifications of the stop plate Model indication of warp stop pieces Most shuttleless looms use electrical warp stop pieces. The models include EGU type, EOU type, EGR type, and EOR type. The d…

Maintenance and management of stop tablets 1. Maintenance of the warp stop discs (1) When the machine is shut down, the warp stop discs must be properly transported into the heald disc room, and a dedicated per…

Use of menstrual tablets There are two types of stop pieces used in shuttleless looms: open type and closed type. For closed-end warp stops, use a heddle threading hook to guide the warp yarn through the thread…

Types and technical requirements of discontinued tablets 1. Types of warp stop plates: According to the form of the automatic stopping device, warp stop plates can be divided into mechanical warp stop plates (M…

The function of menstruation tablets and the conditions they should meet The warp stop device is an indispensable part of the shuttleless loom. The action of the warp stop piece forms the automatic stop of the …

Management of jet reed 1. Incoming factory inspection (1) Put the air-jet reed into a plastic bag and seal it, and pack it piece by piece in a suitable carton or wooden box to avoid damaging the reed teeth. Pac…

Maintenance and management of air jet reed 1. Maintenance of air jet reed (1) Clean the yarn. (2) Cleaning the air jet reed: using artificial wool surface cleaning and mechanical cleaning. A special ultrasonic …