2024 年 5 月

Photoelectric weft detection device for water jet loom When water-jet looms use high-voltage discharge weft detection devices to weave twisted fabrics, they have very high requirements for water quality. They n…

Electronic let-off system for water jet loom The electronic warp let-off of the water-jet loom can cooperate with the winding mechanism according to the tension and weft density of the fabric. During the weavin…

Control system electronic weft storage device The electronic weft storage device can wrap the weft around the length measuring drum according to pre-set data and place the weft quantitatively. This device consi…

How the control system works The circuit diagram of W-2200 electronic control board is shown in Figure 3-44. After the loom is connected to the power supply, each transformer and logic control unit are energize…

Control system electric control box The electric control box is the heart of the water-jet loom control system. All parameters of the loom are sent to the electric control box, which analyzes and processes the …

Control system timing signals The timing signals of water-jet looms are generally controlled by proximity switches or fully electric encoders. At present, most water-jet looms use proximity switches. Timing sig…

Control system operating device The operating device of the water-jet loom consists of button boxes installed on the left and right sides of the loom. The button box on the left contains all buttons, including …

Control system weft detection The weft detection of water-jet looms, commonly known as “weft detection device”, mainly has the following three forms, and the latter two forms are widely adopted. (1)…

Control system fault detection and automatic shutdown device The water-jet loom is equipped with multiple fault detection and self-stop devices to ensure the normal operation of the loom. Its main functions are…