Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric News Ordinary diamond chiffon is “unprecedented” to be produced with imported air-jet looms? The phenomenon of “killing chickens with a bull’s-eye” reappears in the weaving market!

Ordinary diamond chiffon is “unprecedented” to be produced with imported air-jet looms? The phenomenon of “killing chickens with a bull’s-eye” reappears in the weaving market!



Since the epidemic, in order to maintain production and normal operations, textile bosses have been racking their brains to think of ways. Among them, this is not the first time that the method of “excess…

Since the epidemic, in order to maintain production and normal operations, textile bosses have been racking their brains to think of ways. Among them, this is not the first time that the method of “excessive use of materials” has been mentioned. First, Japan imported Tsuda For “bad fabrics” such as Komaori pongee and polyester taffeta, the million-in-one covering machine finally gave up adding single units and only made grid connections…

No, recently it has A textile company made overuse of materials and replaced the diamond chiffon that can be produced with ordinary water-jet looms with imported air-jet looms. Such a situation is still very rare in the textile market!

“Unprecedented” overkill and underutilization, just to pursue higher quality!

Ordinary diamond chiffon is usually more than enough to use water-jet looms, but this time it is “unprecedented” to use air-jet looms imported from Japan. Why?

According to this phenomenon, the person in charge of the textile company said: “We did not expect that customers would raise To meet this requirement, we have ordered about 50,000 meters of fabric. The customer requires us to have no more than 3 flaws per 150 meters of fabric. This quality is very high and is difficult to achieve with ordinary water-jet looms.”

It is understood that the weight of diamond chiffon is relatively light, about 40 grams per square meter, and these light-weight gray fabrics are generally produced on water-jet looms, but they are generally produced on water-jet looms. The slight stoppage produced by the water loom on such thin fabrics is also very obvious, so basically there will be several flaws on the gray fabric every 150 meters. This problem can be avoided if an air jet loom is used for production.

While pursuing quality, price is also very important!

Different looms are used, and of course there will be differences in price. After all, they are imported looms. Some imported looms are much different from ordinary domestic looms. There may be a ten-fold difference, so while the quality of this diamond chiffon has been improved, the price has also increased. At the same time, the person in charge of the textile company stated that this fabric was originally only more than 2 yuan per meter, but now it is on the original basis. With an additional 0.5 yuan per meter, the final price is probably about 3 yuan per meter. In fact, this price is not high, and it is still acceptable on the premise of improving quality.

For weavers, the profit of weaving with air-jet looms is much higher than that of water-jet looms It is understood that the cost of this piece of fabric is only more than 1 yuan. Usually, the profit of producing a loom on a water-jet loom is about 100 yuan. The output of an air-jet loom is also very high due to its high speed. Generally, one loom The machine has a profit of 300 yuan (calculated based on the manufacturer’s quotation), so the weavers are happy to accept such “overkill”.

Affected by the epidemic, orders have dropped sharply, so we can only focus on quality!

Due to the special reasons of the epidemic this year, the order volume cannot be compared with previous years. Because of this, many customers have become strict in terms of quality. This kind of thing does not only happen in weaving. The market is also vividly reflected in the printing and dyeing market.

The editor has a friend who is a salesman in a dyeing factory. I heard him say before: “Nowadays, the quality in the dyeing factory is very tight. Although the market is not very good, we We are still very busy. When we were busy in the past, no one cared about your quality. As long as we could ship the goods on time, it is different now. If something goes wrong, we have to pay for it ourselves, so we have been paying special attention to quality recently.”

Indeed, during the peak season last year, all the textile bosses were extremely busy, with only 10,000 to 20,000 meters If you do something bad and the customer is dissatisfied, you will be compensated. But this year is different. Orders are so scarce. Of course, you have to care about quality issues. Moreover, some orders are not only small in quantity, but also have pitiful profits, and some even go to the point of losing money. , so everyone strictly controls the quality.

Postscript
The market is not good this year, and there are stocks everywhere , textile bosses have used all kinds of methods to sell goods, sell at low prices, and keep themselves in business normally. Now we are about to usher in the Golden Nine. No matter how bad the market is, I believe there will be orders placed, and textile bosses don’t need to overdo it. Worry, we have survived the worst outbreak stage and off-season, what else can we not survive!

<br

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/21298

Author: clsrich

 
Back to top
Home
News
Product
Application
Search